當平面設計產業盛行之下，設計師在平面設計成品印製也成為重要關鍵之一。本研究以設計師角度，找出影響設計師平面設計成品印製要素，作為日後平面設計成品印製適用參考依據。本研究先以文獻探討蒐集國內外平面設計成品現況與成品印製流程，並對現任職平面設計相關工作之設計師進行專家訪談，以瞭解設計師平面設計印製需求，而後，以問卷調查設計師平面設計成品印製要素。訪談對象為七位平面設計師；問卷發送對象為五十位平面設計相關行業之設計師，所收集之問卷資料以模糊層級分析法，最後歸納出三點結論如下：
一、平面設計成品現況：對於數位化的時代，平面設計成品產業面臨著挑戰及改變，普遍設計師完稿過度依賴資訊裝置，使平面設計成品的呈現上與設計想法有所落差，造成設計師與印刷廠之間印製與溝通的問題產生。
二、平面設計成品印製：平面設計成品印製流程依序為印前作業、印製作業及印後作業，共三個階段；平面設計成品印製版式可分為平版印刷、凸版印刷、凹版印刷、網版印刷及數位印刷，共五個版式。
三、影響設計師平面設計成品印製品質要素：可分為三項印製要素構面及九項印製因素，印製要素構面依重要程度依序為印製規劃、印刷適性及印製程序；九項印製因素依重要程度依序為印製溝通、色彩表現、成本考量、時間考量、被印材質、印後加工、印製版式、印製作業及印刷油墨。

As graphic design is in prevalence, designers play an important role to the printing of graphic design . Therefore, this study was conducted to find out the factors that affect the printing of graphic design in the perspective of designers, which could be used as a reference for future graphic design printing. In this study, we first collected the current status of graphic design printing by literature review. Next, we conducted expert interviews with seven graphic designers to understand their graphic design printing needs. Then, we organized fifty designers' opions of factors that affect graphic design printing by questionnaire. The collected questionnaire data were analyzed by the Fuzzy Analytic Hierarchy Process. The results could be concluded as follows:
1.Under digitalization, graphic design is facing challenges and changes. Generally, designers depended too much on graphic software and digital appliances, which resulted in the discrepancies between design ideas and the outcome of graphic design and then caused problems in printing and communication between designers and printers.
2.Print production process could be divided into three stages: pre-press operation, printing operation, and post-press operation. Then, types of printing techniques can be divided into lithographic printing, letterpress printing, gravure printing, screen printing, and digital printing.
3.Factors affecting the quality of graphic design printing could be divided into three catogories, which are print planning, printability, and print process, and could furthermore be divided into nine factors, which are communication, color performance, cost, time consideration, printing stock, post-press finishing, printing techniques, printing procedures, and ink, in order of importance.

古又羽（譯）（2017）。設計師一定要懂的基礎印刷學（原作者：PIE International）。臺北市：積木文化。（原著出版年：2012）
何耀宗（1975）。平面廣告設計：視覺傳達與情報美術。臺北市：雄獅圖書股份有限公司。
余豐榮、魏宜如（2017）。結合模糊層級分析法與類似度理想解順序偏好法於中古車選購排序之模式。科技與工程技術期刊，13（1），1-11。
吳逸禪、張芷瑄、吳嫣然、寧雅妮（2017）。石頭紙受傳統平版印刷速度影響之印刷品質特性研究。圖文傳播藝術學報，90-99。
林行健（2018）。印刷設計概論。新北市：視傳文化。
林翰苼（2018）。凹版印刷對軟包裝常用的塑膠材質之色彩品質研究。圖文傳播藝術學報，145-152。
邱光輝、呂振華(2018)。健豪印刷。產業與管理論壇，20（4），058-071。
邱郁鈞、蕭惠伃、蘇士鈞、孫千淳（2019）。比較臺灣與日本品牌之黃豆油墨應用於塗佈紙的印刷適性之研究。圖文傳播藝術學報，183-194。
邱瑞育（2019）。光變色油墨之塗布與變色效果。中華印刷科技年報， 345-376。
馬立懿，曾絲宜，洪秀文、張貽鈞(2019)。臺灣數位印刷專業人才培育及產業人才需求調查研究。中華印刷科技年報，257-287。
張紹勳（2012）。模糊多準則評估法及統計。臺北市：五南。
梁迺鼎、韓豐年（2019）。數位印後製程創新與加值商品開發。中華印刷科技年報，396-430。
陳易希（2020）。活版印刷下的優雅珍寶。美育雙月刊，237，090-095。
陳姿穎、趙珮宇、蔣竺耘（2017）。大學平面設計科系應屆畢業生專業能力與業界期望之探討。圖文傳播藝術學報，247-258。
陳紀薳（2019）。印刷產業製造服務化之雲端品牌權益應用研究（碩士論文）。取自臺灣博碩士論文知識加值系統。（系統編號107NTUA0727007）
陳殷哲、李彩琴（2019）。應用模糊層級法分析人力資源職能模型指標與發展訓練課程體系之研究。企業管理學報，44（2），87-111。doi: 10.3966/102596272019060442004
曾琪淑（2002）。印刷數位化對印刷產業之衝擊與探討。科技博物，6(4)，19-33。 doi: 10.6432/tmr.200207.0019
黃顯勛（2010）。應用特殊印刷的平面設計實驗創作（碩士論文）。取自臺灣博碩士論文知識加值系統。（系統編號098NTUS5619044）
謝惟雍、林怡欣、林姵嬅、林政榮（2011）。探討印後加工之附加價值－以名片為例。圖文傳播藝術學報，168-174。doi:10.29886/ntuadgca.201105.0018
Taiwan Design Research Institute（2020）。關於台灣設計研究院。2020年2月，取自：https://www.tdc.org.tw/
教育部統計處（2020）。108年大專校院藝術學門相關科系（所）學生人數。2020年8月，取自：https://depart.moe.edu.tw/ed4500/
Abushawali, M., Lim, Y. P., & Bedu, A. R. (2013). The impact of new digital media on graphic designer in Jordan. Proceedings of the 2013 International Conference on Informatics and Creative Multimedia (pp. 274-277), Kuala Lumpur, Malaysia. https://ieeexplore.ieee.org/document/6702823
Amaranand, & Suman, Y. (2017). An Overview of Packaging Industry: A Case Study of Janus Packaging Pvt. Ltd., Baddi. International Journal of Science, Engineering and Computer Technology, 7(1), 9-13. Retrieved from https://search.proquest.com/scholarly-journals/overview-packaging-industry-case-study-janus-pvt/docview/2156320834/se-2?accountid=14228
Ambrose, G., Harris, P., & Ball, N. (2020). The Fundamentals of Graphic Design. London, England：Bloomsbury Visual Arts.
Beier, S. (2015). The design process seen through the eyes of a type designer. Artifact: Journal of Design Practice, 3(4), 8-1.
Buckley, J. J. (1985). Fuzzy hierarchical analysis. Fuzzy Sets and Systems, 17(3), 233-247. https://doi.org/10.1016/0165-0114(85)90090-9
Chiang, W. S., Idris, M. Z., & Chuen, T. W. (2019). Is Graphic Design Being Taken Seriously as a Profession?. Journal of Arts & Social Sciences, 3(1), 1-9.
Collins, W., Hass, A., Jeffery, K., Martin, A., Medeiros, R., & Tomljanovic, S. (2018). Graphic design and print production fundamentals.
Cornish, K., Goodman-Deane, J., Ruggeri, K., & Clarkson, P. J. (2015). Visual accessibility in graphic design: A client–designer communication failure. Design Studies, 40, 176-195. doi: 10.1016/j.destud.2015.07.003
doi:https://doi.org/10.1007/978-3-030-17269-5_19
Fathurrahman, D. (2020). Time and designer: Unveiling design practitioners’ characteristics on time management, perfectionism, procrastination, and burnout (Master's thesis). Retrieved from https://aaltodoc.aalto.fi/handle/123456789/101829
Feng, X., Pan, Z., & Wang, X. (2016). The Importance of Practical Subject in the Digital Prepress Design Teaching. Proceedings of the 2016 Eighth International Conference on Measuring Technology and Mechatronics Automation (ICMTMA), pp. 788-791. https://ieeexplore.ieee.org/document/7488667
Fortunati, L., & O'Sullivan, J. (2019). Situating the social sustainability of print media in a world of digital alternatives. Telematics and Informatics, 37, 137-145. https://doi.org/10.1016/j.tele.2018.04.005
Gan, D. S. S. (2011). A Nation’s visual language: Nation branding and the visual identity of contemporary malaysia (Order No. 27766978). Available from ProQuest Dissertations & Theses A&I. (2388858284).
Gautam, M., & Bishnoi, I. (2020). Utilization Pattern of Print Media Sources by School-Going Children of Varanasi District. Ind. J. Pure App. Biosci, 8(2), 164-168. http://dx.doi.org/10.18782/2582-2845.8030
Gnanavelbabu, A., & Arunagiri, P. (2018). Ranking of MUDA using AHP and Fuzzy AHP algorithm. Materials Today: Proceedings, 5(5, Part 2), 13406-13412. https://doi.org/10.1016/j.matpr.2018.02.334
Hassan, T. (2018, August). Towards a Universally Editable Portable Document Format. In Milios,E., & Matwin, S (Chair), The ACM Symposium on Document Engineering. DocEng 2018 Symposium Organization, Halifax, NS, Canada. https://dl.acm.org/doi/abs/10.1145/3209280.3229083
Jewitt T.S. (1996) Traditional impact printing. In: Gregory P. (Eds.), Chemistry and Technology of Printing and Imaging Systems (pp. 4-34). Springer, Dordrecht. https://doi.org/10.1007/978-94-011-0601-6_2
Kanat, S. (2019). The Perceptions of Graphic Design Concept on Students Study on Graphic Design. Journal of Education and Training Studies, 7, 65. https://doi.org/10.11114/jets.v7i5.4220
Kinik, M., & Ozturk, M. S. (2019). Instructor Opinions about the Problems That the New Graduated Graphic Designers Experienced in Sector. Proceedings of the The Eurasia Proceedings of Educational and Social Sciences, 14, 2587-1730.
Kipphan, H. (2014). Handbook of Print Media: Technologies and Production Methods. Berlin, Germany: Springer.
Legge, G. E., & Bigelow, C. A. (2011). Does print size matter for reading? A review of findings from vision science and typography. Journal of vision, 11(5), 8-8.
Liao, Y., & Lü, X. (2017). Optimized Three-Stage Strategy of Orderly Management of File Stream in Network Printing Workflow. Journal of Systems Science and Information, 5(1), 74-87. https://doi.org/10.21078/JSSI-2017-074-14
Li-ming, G., Jian, L., & Lei, L. (2009). Control and Measurement on Printing-Image Color with Complete Color Management. Proceedings of the 2009 Fifth International Conference on Natural Computation （pp. 362-366）, Tianjian, China. https://ieeexplore.ieee.org/document/5366896
Lipiak, J., & Salwin, M. (2019). The Improvement of Sustainability with Reference to the Printing Industry – Case Study. Proceedings of International Scientific Technical Conference MANUFACTURING, pp. 254-266.
Lovelace, R. W., Thom, K., & Abdullahi, A. A. (2016). Paper and Print Technology. In R. W. Lovelace., & K. Thom (Ed.), Print and Paper Buyers’ Handbook of Terms 2002 Whitmar Publications, Tunbridge Wells. Retrieved from https://doi.org/10.1016/B978-0-12-803581-8.02118-4
Luo, M. (2017). Discussion on Redesign of Image from Digital Printing Process. Asian Journal of Social Science Studies, 2(2), 45.
Masod, M.Y., Zakaria, S.N., & Susanto, S.A. (Ed.s). (2019). Enterprise Systems in Print Production Workflow [Special issue]. International Journal of INTI. 22, 64-69. http://doi.org/10.1016/B978-0-12-800726-6.00004-5
Masod, M.Y.B., Abdullah, H., Ahmad, R., & Shafia, J. (2012, September). Identifying key digital prepress competence requirements for printing technology workforce. In M. Y. B, Masod (Chair), 2012 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA). Institute of Electrical and Electronics Engineers Inc. (IEEE), Bandung, Indonesia.
Moreira, A., Silva, F. J. G., Correia, A. I., Pereira, T., Ferreira, L. P., & de Almeida, F.(2018). Cost reduction and quality improvements in the printing industry. Proceedings of the Procedia Manufacturing (pp. 623-630), Columbus, OH, USA. Retrieved from http://www.sciencedirect.com/science/article/pii/S2351978918312241
Murugesan, S., Tejashri, S. L., Sonali, M. P., & Akanksha, P. S. (2017). Register Control System for Offset Printing. Proceedings of the 2017 International Conference on Intelligent Sustainable Systems (ICISS), Book Register control system for offset printing(pp. 48-52). Palladam, Indial. https://ieeexplore.ieee.org/abstract/document/8389227
Neves, M. （2017）. The future of print design relies on interaction. The Design Journal, 20(sup1), S4087-S4100. https://doi.org/10.1080/14606925.2017.1352910
Ozcan, A., & Zulfigaroglu, R. （2020）. An investigation on printability of different solvent based inks by gravure printing onto various substrates. Journal of Graphic Engineering and Design, 11(1), 31.
Pereira, J. B., Alvelos, H., Chatterjee, A., & Barreto, S. （2020, January）. ANTI-AMNESIA: ARTICULATING DESIGN AND MEDIA TOWARDS LETTERPRESS PRINTING’S HERITAGE PRESERVATION AND VALUE CREATION. Paper presented at the Post-Digital Letterpress Printing, Porto, Portugal. Abstract retrieved from https://pdlp.fba.up.pt/documents/PDLP20-Book-of-Abstracts.pdf#page=54
Saaty, T. L. (1990). How to make a decision: the analytic hierarchy process. European journal of operational research, 48(1), 9-26.
Senkivskyy, V., Pikh, I., Havenko, S., & Babichev, S. (2019). A Model of Logical Inference and Membership Functions of Factors for the Printing Process Quality Formation. In Volodymyr, L., Sergii, B., Waldemar, W., Olena, V., Svetlana, V., ＆ Svetlana, R(Eds.), ISDMCI 2019: Lecture Notes in Computational Intelligence and Decision Making (pp. 609-621). Zalizniy Port, Ukrainel: Springer, Cham. https://doi.org/10.1007/978-3-030-26474-1_42
Senkivskyy, V., Pikh, I., Senkivska, N., Hileta, I., Lytovchenko, O., & Petyak, Y. (2021). Forecasting Assessment of Printing Process Quality. In: Babichev S., Lytvynenko V., Wójcik W., Vyshemyrskaya S. (eds), ISDMCI 2020. Advances in Intelligent Systems and Computing, vol 1246. Lecture Notes in Computational Intelligence and Decision Making (pp. 467-479). Springer, Cham. https://doi.org/10.1007/978-3-030-54215-3_30
Thapar, S. S., & Sarangal, H. (2020). Quantifying reusability of software components using hybrid fuzzy analytical hierarchy process (FAHP)-Metrics approach. Applied Soft Computing, 88, 105997. https://doi.org/10.1016/j.asoc.2019.105997
Van Audenhove, L., & Donders, K. (2019). Talking to people III: Expert interviews and elite interviews. In The Palgrave handbook of methods for media policy research (pp. 179-197). Palgrave Macmillan, Cham. Retrieved from https://doi.org/10.1007/978-3-030-16065-4_10
Walker, S. (2017). Research in graphic design. The Design Journal, 20(5), 549-559.
Wang, Y., & Ai, Y. (2019). Research on the Influence of Digital Printing Quality. In 2019 2nd World Conference on Mechanical Engineering and Intelligent Manufacturing (WCMEIM) (pp. 392-395). https://ieeexplore.ieee.org/document/9004170
Wu, S. (2020, April). Development of Graphic Design Based on Artificial Intelligence. In Journal of Physics: Conference Series (Vol. 1533, No. 3, p. 032022). IOP Publishing.
Xu, X. (2017). The Application of Digital Prepress Technology in Advertising Project. Proceedings of the 4th International Conference on Education, Management and Computing Technology (ICEMCT 2017), pp. 1073-1077. https://doi.org/10.2991/icemct-17.2017.235.
Zadeh, L. A. (1965). Fuzzy sets. Information and Control, 8(3), 338-353.
Zhang, S., Xu, L., Tang, C., & Peng, J. (2019). U.S. Patent No. 10,259,676. Washington, DC: U.S. Patent and Trademark Office.