研究生: |
楊翊呈 Yang, Yi-Cheng |
---|---|
論文名稱: |
LED節能杯燈散熱鰭片之參數設計與熱傳影響研究 Investigation on Heat Transfer in Parametric Design of LED Energy Saving Cup Lamp Heat Fins |
指導教授: |
周明
Jou, Min |
學位類別: |
碩士 Master |
系所名稱: |
工業教育學系 Department of Industrial Education |
論文出版年: | 2017 |
畢業學年度: | 105 |
語文別: | 中文 |
論文頁數: | 85 |
中文關鍵詞: | 發光二極體 、LED封裝晶片 、散熱鰭片 、自然對流 |
英文關鍵詞: | Light-emitting diode, LED package, heat fins, natural convection |
DOI URL: | https://doi.org/10.6345/NTNU202203042 |
論文種類: | 學術論文 |
相關次數: | 點閱:128 下載:4 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
發光二極體(Light-emitting diode,LED)是一種可產生光源的半導體電子元件,在現今也發展了多種形態之高亮度LED,比起過去傳統燈具擁有多種優勢,如:發光效率較高、耗電量低、使用壽命長且較環保等。但LED在電能轉換為光源的過程中,會有部份能量轉換為熱能。此時當熱量積存於LED封裝晶片,如無法有效進行散熱,將嚴重影響LED的發光與工作效率,以及使用壽命。而在現今對於LED較常見之散熱技術,為搭配散熱鰭片將產生之熱量傳遞至鰭片,並透過空氣自然對流將熱傳遞出去。因此本研究主要透過電腦數值模擬方式,並使用Icepak熱傳分析軟體進行模擬實驗。透過改變LED散熱鰭片之數量、傾斜角度、材質以及表面放射率,探討此四種改變參數分別對於LED溫度之熱傳影響情形。而研究結果顯示,隨著鰭片數量增加,LED整體溫度會隨之降低,但當數量增加到一定值時,LED整體溫度反而會因此提升;隨著鰭片傾斜角度增加,LED整體溫度會因此持續提升;而散熱鰭片使用不同材質,LED整體溫度也會因材質的不同而產生改變;隨著放射率數值增加,LED整體溫度會隨之持續降低。因此瞭解此四種改變參數會對於LED散熱鰭片熱傳性能產生影響。
The light-emitting diode (LED) is a light source that can be used to produce various semiconductor components. Modern advancements in LEDs include a number of high brightness LED illuminants offering a number of advantages when compared to conventional lighting such as: high luminous efficiency, low power consumption, long service life, and better environmental friendliness. However, when LED converts energy into visible light, part of the energy will generate heat, leading to heat accumulation in the LED package. Poor heat dissipation will significantly affect LED light emission, work efficiency, and service life. Common forms of LED heat dissipation technology include heat fins, wherein heat generated by the LED package is transferred to the fins, allowing natural convection of air to transfer the heat into the ambient environment. This study conducts computer numerical simulation experiments by using Icepak heat transfer analysis software. A total of 4 variable parameters are used, namely: (1) number of LED heat fins, (2) tilt angle, (3) material, and (4) surface emissivity, to investigate LED temperatures and heat transfer scenarios. Results show that overall LED temperature decreases with increasing number of fins up to a certain number of fins; overall LED temperature assumes a continuous cooling phenomenon when certain tilt angles are used; overall LED temperature differs according to the fin materials; and increasing surface emissivity will reduce overall LED temperature. Better understanding of these four parameters will allow improvements to LED cooling fin designs and augment LED heat transfer performance.
[1] 熊月之,“照明與文化:從油燈、蠟燭到電燈”, 社會科學,94-103,3,2003年7月。
[2] 潘秀英,科學巨人:走在科學的最前沿,安徽美術出版社,2014年1月。
[3] 黃駿凌,“高功率LED均溫基板結合發電晶片模組之性能分析”,國立臺灣海洋大學,輪機工程學系碩士學位論文,2011年7月。
[4] 賴俊明,“熱傳遞路徑對 LED燈泡接面溫度的影響”,國立交通大學,工學院精密與自動化工程學程碩士學位論文,2012年7月。
[5] J. Petroski, “Thermal Challenges Facing New Generation Light Emitting Diodes (LEDs) for Lighting Applications,” Proceedings of SPIE, vol. 4776, pp. 215-222, Nov. 2002.
[6] 吳景智,“高功率LED散熱模擬研究”,聖約翰科技大學,自動化及機電整合研究所碩士學位論文,2015年1月。
[7] 周志敏、周紀海、紀愛華,LED驅動電路設計與應用,五南圖書出版股份有限公司,2008年2月。
[8] 史光國,半導體發光二極體及固體照明,全華科技圖書股份有限公司,2005年12月。
[9] 王志耀,“微型散熱技術介紹”,光學工程,44-54,72,2000年12月。
[10] 鄭澤明、楊士震、周波、蘇宏明、張曜庭、曹詠植,“方型柱狀鋁材散熱鰭片熱流特性分析”, 建國科大學報:工程類,113-132,28,3,2009年3月。
[11] A. Bar-Cohen, A. D. Kraus, and S. F. Davidson, “Thermal Frontiers in the Design and Packaging of Microelectronic Equipment,” Journal of Mechanical Engineering, vol. 105, no.6, pp. 53-59, June. 1983.
[12] 蔡幸甫,“散熱材料發展商機”, IEK產業情報網,2012年11月。
[13] 曾憲中、鄭澤明、張宇博,“市售散熱座於自然對流與強制對流狀態下之熱傳實驗研究”,建國科大理工期刊,47-60,35,2,2016年4月。
[14] 藍庭顯、陳力鑕,“二維方形容器有兩塊加熱板之隨機方向搜尋法的最佳散熱位置研究”, 中華科技大學學報,103-116,57,2013年10月。
[15] Shankar Durgam, S.P. Venkateshan, and T. Sundararajan, “Experimental and numerical investigations on optimal distribution of heat source array under natural and forced convection in a horizontal channel,” International Journal of Thermal Sciences, vol. 115, pp. 125-138, May. 2017.
[16] Sajjad Bouzari, and Jafar Ghazanfarian, “Unsteady forced convection over cylinder with radial fins in cross flow,” Applied Thermal Engineering, vol. 112, pp. 214-225, Feb. 2017.
[17] X. Yang, Y.Y. Yan, D. Mullen, “Recent developments of lightweight, high performance heat pipes,” Applied Thermal Engineering, vol. 33-34, pp. 1-14, Feb. 2012.
[18] 曾憲中、鄭澤明、王衍展、汪嘉琪,“不同鰭片散熱模組之熱傳性能實驗研究”,建國科大理工期刊,43-56,34,1,2014年10月。
[19] E. M. Sparrow, and S. B. Vemuri, “Orientation effects on natural convection/radiation heat transfer form pin-fin arrays,” International Journal of Heat and Mass Transfer, vol. 29, no.3, pp. 359-368, Mar. 1986.
[20] 鄭澤明、曾憲中、黃欣雅、詹皓任、黃偉凱,“具強制熱對流旋轉圓柱體之熱分析”,建國科大理工期刊,67-78,35,1,2015年10月。
[21] H. Iwasaki, and M. Ishizuka, “Forced convection air cooling characteristics of plate fins for notebook personal computers,” IEEE International Society Conference on Thermal Phenomena, vol. 2, pp. 21-26, Feb. 2000.
[22] S. Manish, and R. L. Webb, “Heat rejection limits of air cooling plane fin heat sinks for computer cooling,” IEEE Transaction on Components and Packaging Technologies, vol.26, no.1, pp.71-79, Apr. 2003.
[23] M. Arik, and S. Weaver, “Chip Scale Thermal Management of High Brightness LED Packages,” Proceedings of the SPIE, vol. 5530, pp.214-223, Oct. 2004.
[24] N. Narendran, and Y. Gu, “ Life of LED-Based White Light Sources,” IEEE/OSA Journal of Display Technology, vol. 1, no. 1, Sep. 2005.
[25] M. W. Shin, “Thermal Design of High-Power LED Package and System,” Proc. of SPIE, Vol. 6355, pp. 1-13, Sep. 2006.
[26] 王苑婷,“探討LED散熱器最佳設計及其排列之研究”,崑山科技大學,機械工程研究所碩士論文,2010年。
[27] Hui Huang Cheng, De-Shau Huang, and Ming-Tzer Lin,“Heat dissipation design and analysis of high power LED array using the finite element method,” Microelectronics Reliability, vol. 52, no. 5, pp. 905–911, May. 2012.
[28] Bladimir Ramos-Alvarado, Bo Feng, and G.P. Peterson,“Comparison and optimization of single-phase liquid cooling devices for the heat dissipation of high-power LED arrays,” Applied Thermal Engineering, vol. 59, no. 1-2, pp. 648–659, Sep. 2013.
[29] Lan-Ying Zhang,Yang-Fei Zhang, Jia-Qi Chen, and Shu-Lin Bai,“Fluid flow and heat transfer characteristics of liquid cooling microchannels in LTCC multilayered packaging substrate,” International Journal of Heat and Mass Transfer, vol. 84, pp. 339–345, May. 2015.
[30] M. Shatalove, A. Chitnis, P. Yadav, M.F. Hasan, J. Khan, V. Adivarhan, H.P. Maruska, W.H. Sun, and M.A. Khan, “Thermal Analysis of Filp-Chip Packaged 280nm Nitrida-Based Deep Ultraviolet Light-Emitting Diodes,” Applied Physics Letters, vol. 86, no. 20, May. 2005.
[31] 楊家瑞,“高亮度LED燈散熱設計與分析”,明志科技大學,機電工程研究所碩士學位論文,2012年7月。
[32] Seri Lee, “Optimum design and selection of heat sink,” IEEE Transactions On Components, Packaging, and Manufacturing Technology Part-A, vol. 18, no. 4, pp. 812-817, Dec. 1995.
[33] Y. B. Liu, “On Thermal Structure Optimization of a Power LED Lighting,” Procedia Engineering, vol. 29, pp. 2765-2769, 2012.
[34] Vítor A.F. Costa, and António M.G. Lopes, “Improved radial heat sink for led lamp cooling,” Applied Thermal Engineering, vol. 70, no. 1, pp. 131-138, Sep. 2014.
[35] 黃建勝、李東哲、蔡瑞益,“散熱鳍片幾何尺寸對高功率LED模組熱傳性能之研究”, 先進工程學刊,235-240,3,3,2008年7月。
[36] Seung-Jae Park, Daeseok Jang, and Kwan-Soo Lee, “ Thermal performance and orientation effect of an inclined cross-cut cylindrical heat sink for LED light bulbs,” International Journal of Heat and Mass Transfer, vol. 103, pp. 1371-1377, Dec. 2016.
[37] 許政行、郭家全、王孔政、胡雅慧、陳玉德、孔光源,“高功率LED 陶瓷燈具內散熱基板形狀之熱傳分析”,技術學刊,139-144,27,3,2012年9月。
[38] 李祥,熱傳學分析,鼎茂圖書出版股份有限公司,2010年8月。
[39] “Icepak做自然散熱時Cabinet的設定”,Icepak論壇米克網,取自http://bbs.mekesim.com/thread-94-1-1.html,2009年4月。