簡易檢索 / 詳目顯示

研究生: 霍謙
Huo, Chien
論文名稱: 二維鹵化物鈣鈦礦薄片的製備與特性
Preparation and Characterization of Two-Dimensional Halide Perovskite Flakes
指導教授: 趙宇強
Chao, Yu-Chiang
口試委員: 駱芳鈺
Lo, Fang-Yuh
許經夌
Hsu, Ching-Ling
趙宇強
Chao, Yu-Chiang
口試日期: 2023/06/26
學位類別: 碩士
Master
系所名稱: 物理學系
Department of Physics
論文出版年: 2023
畢業學年度: 111
語文別: 中文
論文頁數: 47
中文關鍵詞: 低維鈣鈦礦醋酸鉛掌性材料圓偏振發光
英文關鍵詞: Low dimension perovskite, Lead(II) acetate, Chiral material, Circularly Polarized Light
研究方法: 實驗設計法
DOI URL: http://doi.org/10.6345/NTNU202300847
論文種類: 學術論文
相關次數: 點閱:75下載:3
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 本次研究我們採用溶液法,先使用水作為溶劑配置Pb(Ac)_2溶液作為前驅物,使用冰箱控制溫度並搭配旋轉塗佈機,成功在二氧化矽基板上生成大量Pb(Ac)_2的薄片晶體,直徑大小多為6~7μm,厚度大部分為10nm左右。
    接著透過二步法,配置MAI與MABr溶液,將溶液旋塗在Pb(Ac)_2上得到MAPbI_3與MAPbBr_3的鈣鈦礦,接著我們進一步配置PEAI溶液,用旋塗法把溶液塗佈在先前製成的MAPbI_3鈣鈦礦上合成二維鈣鈦礦,使用XRD、Micro PL量測後得到與文獻對應的PL峰值與XRD圖譜,確認有成功將Pb(Ac)_2轉換成鈣鈦礦。
    在搭配液態氮做變溫量測時,會由於晶格扭曲的原因,溫度越低PL峰值越高,並且會出現紅移的現象,透過阿瑞尼士方程式,我們得到MAPbI_3的激子束縛能E_b=44.07meV,MAPbBr_3的激子束縛能E_b=94.45meV,(PEA)_2 PbI_4的激子束縛能E_b=54.63meV,可以看出鈣鈦礦結構的侷限程度增加會讓E_b增加。
    同樣透過二步法,我們將掌性長鏈分子R/S-MBABr旋塗在MAPbBr_3鈣鈦礦之上,並用Micro PL搭配左右旋光測試不同掌性的分子對旋光的選擇性,並使用Micro PL量測材料的圓偏振發光(CPL),並算出兩者各自的發光不對稱因子g_lum,雖然不同片鈣鈦礦晶體所算出的g_lum並不穩定,但(R-MBA)_2 PbI_4所得到的g_lum均小於0,而(S-MBA)_2 PbI_4所得到的g_lum均大於0,意味著(R-MBA)_2 PbI_4的CPL以右旋光為主,(S-MBA)_2 PbI_4的CPL則是左旋光為主,證明透過二步法所製成的掌性鈣鈦礦具有作為旋光材料的潛力。

    In this research, we used solution method to make Pb(Ac)_2 for precursor by using DI water for solvent. We used refrigerator to contain the temperature and spin coater to let the solution distribute uniformly on the SiO_2 substrate. The diameter of most of the flakes is 6~7nm, and the thickness of those is about 10nm.
    Then, we used two-step method to transfer Pb(Ac)_2 to MAPbI_3 and MAPbBr_3. We made MAI and MABr solution and used spin coater to let the solution on the Pb(Ac)_2 and become perovskites. Furthermore, we made PEAI and R/S-MBAI solution to spin on MAPbI_3 to make two-dimensional perovskite and chiral perovskites. By using Micro PL and XRD, we confirmed that we changed Pb(Ac)_2 into perovskites successfully.
    As we did temperature dependence PL, we can see that the lower temperature is, the higher the PL peak is. The PL peak also redshift when the temperature decrease. By using Arrhenius equation, we got the excitation binding energy of MAPbI_3 is E_b=44.07meV, MAPbBr_3 is E_b=94.45meV, and (PEA)_2 PbI_4 is E_b=54.63meV. The result seems to tell that the restrict space in the perovskite influences E_b.
    We used two step method to transfer MAPbI_3 to (R/S-MBA)_2 PbI_4. Then we used Micro PL to measure the CPL of chiral 2D perovskites by right-headed or left-headed circularly polarized light and calculated g_lum. Although the chiral perovskites’ g_lum are not steady, we can still find that the CPL of (R-MBA)_2 PbI_4 is right-headed circularly polarized, and the CPL of (S-MBA)_2 PbI_4 is right-headed circularly polarized. The result proves that the chiral 2D perovskites made by two step method can be good chiral optical materials.

    第一章 緒論 1 1.1 前言 1 1.2 鈣鈦礦 2 1.3 掌性 5 1.4 研究動機 6 第二章 原理 7 2.1 光致發光 7 2.2 螢光與磷光 8 2.3量子侷限效應 10 2.4 表面效應 11 第三章 實驗儀器與設備 13 3.1 實驗儀器 13 3.1.1 紫外光臭氧清洗機(UV Ozone) 13 3.1.2 手套箱(Glove Box) 13 3.1.3 旋轉塗佈機(Spin Coater) 13 3.1.4 加熱板(Hot Plate) 14 3.1.5光學顯微鏡(Optical Microscope) 14 3.1.6 熱風槍(Hot Gun) 14 3.1.7 光致發光光譜儀(Photoluminescence Spectroscopy, PL) 14 3.1.8 微型光致發光顯微鏡(Microscope Photoluminescence, MPL) 14 3.1.9 原子力顯微鏡(Atomic Force Microscope, AFM) 15 3.1.10 X光繞射儀(X-ray Diffraction, XRD) 15 3.2二維鈣汰礦製成方法 16 3.2.1 基板的切割與表面清洗 16 3.2.2 Pb(Ac)_2長晶 17 3.2.3 Pb(Ac)_2轉換成鈣鈦礦及二維鈣汰礦 17 第四章 實驗結果與探討 18 4.1 環境條件對醋酸鉛長晶的影響 18 4.2 Pb(Ac)_2轉換成鈣鈦礦 30 4.3 三維鈣鈦礦加入長碳鍊分子轉換成二維鈣汰礦 32 4.4 溫度對二維鈣汰礦的影響 35 4.5 掌性二維鈣汰礦的旋光性 39 第五章 結論 45 參考文獻 46

    1. Liu, J., et al., Two-dimensional CH3NH3PbI3 perovskite: synthesis and optoelectronic application. ACS nano, 2016. 10(3): p. 3536-3542.
    2. Yi, Z., et al., Will organic–inorganic hybrid halide lead perovskites be eliminated from optoelectronic applications? Nanoscale Advances, 2019. 1(4): p. 1276-1289.
    3. Sato, T., et al., Extending the applicability of the Goldschmidt tolerance factor to arbitrary ionic compounds. Scientific reports, 2016. 6(1): p. 1-10.
    4. Zhang, Z., et al., Metal Halide Perovskite/2D Material Heterostructures: Syntheses and Applications. Small Methods, 2021. 5(4): p. e2000937.
    5. 謝嘉民, et al., 光激發螢光量測的原理, 架構及應用. 奈米通訊 (28-31 頁), 第十二卷第二期, 2005.
    6. Alivisatos, A.P., Semiconductor clusters, nanocrystals, and quantum dots. science, 1996. 271(5251): p. 933-937.
    7. Bryant, R.G., V. Chacko, and M.C. Etter, Carbon-13 CP/MAS NMR and crystallographic investigations of the structure and solid-state transformations of lead (II) acetate trihydrate. Inorganic Chemistry, 1984. 23(22): p. 3580-3584.
    8. Li, C., et al., Efficient planar structured perovskite solar cells with enhanced open-circuit voltage and suppressed charge recombination based on a slow grown perovskite layer from lead acetate precursor. ACS applied materials & interfaces, 2017. 9(48): p. 41937-41944.
    9. Shen, H., et al., Defect step controlled growth of perovskite MAPbBr3 single crystal. Journal of Materials Science, 2019. 54(17): p. 11596-11603.
    10. Basumatary, P. and P. Agarwal, Photocurrent transient measurements in MAPbI 3 thin films. Journal of Materials Science: Materials in Electronics, 2020. 31: p. 10047-10054.
    11. Kong, W., et al., Characterization of an abnormal photoluminescence behavior upon crystal-phase transition of perovskite CH 3 NH 3 PbI 3. Physical Chemistry Chemical Physics, 2015. 17(25): p. 16405-16411.
    12. Zhang, Z.-Y., et al., The role of trap-assisted recombination in luminescent properties of organometal halide CH3NH3PbBr3 perovskite films and quantum dots. Scientific reports, 2016. 6(1): p. 1-7.
    13. Zhu, L., et al., Graded interface engineering of 3D/2D halide perovskite solar cells through ultrathin (PEA)2PbI4 nanosheets. Chinese Chemical Letters, 2021. 32(7): p. 2259-2262.
    14. Ma, J., et al., Chiral 2D Perovskites with a High Degree of Circularly Polarized Photoluminescence. ACS Nano, 2019. 13(3): p. 3659-3665.
    15. Li, H., et al., Sensitive and stable 2D perovskite single‐crystal X‐ray detectors enabled by a supramolecular anchor. Advanced Materials, 2020. 32(40): p. 2003790.
    16. Wang, D., et al., Photon-induced carrier recombination in the nonlayered-structured hybrid organic-inorganic perovskite nano-sheets. Optics Express, 2018. 26(21): p. 27504-27514.
    17. Zhang, C., Li, S., Dong, X. Y., & Zang, S. Q. (2021). Circularly polarized luminescence of agglomerate emitters. Aggregate, 2(5), e48.
    18. H.P Tranitz H. P. Wagner R. Engelhardt, U. W. Pohl, and D. Bimberg, “Thermal redistribution and dephasing of localized excitons in CdSe/ZnSSe quantum island structures",Phys. Rev. B 65, p.8276(2002)
    19. J. C. Kim, H. Rho, L. M. Smith, and H. E. Jacks“Temperature-dependent micro-photoluminescence of individual CdSe self-assembled quantum dots", Appl. Phys. Lett. 75, 214(1999)

    下載圖示
    QR CODE